Products Description
The 297018400 refrigerator thermistor temperature sensor replacement is a component used in refrigerators to monitor and control the temperature inside the refrigerator compartment. The thermistor is a type of sensor that measures temperature by sensing changes in electrical resistance based on temperature variations.
It's important to note that specific details and compatibility may vary depending on the refrigerator model and manufacturer. This sensor is a replacement for Electrolux Frigidaire Fridge to replace 25314772100 and 25314772100.
Products Parameter
| Item model number: | Freezer Thermistor Sensor | Housing: | ABS |
| OE#: | 297018400 / 25314772100 | Country of Origin: | China |
| Resistance: | 10000 Ohm | Cable: | 2C TS Black |
| EPOXY FILLING: | NB-1/NZ-1 | Operating Temperature: | -20~+85℃ |
| High Light: | Whirlpool Frigidaire Freezer Thermistor, ABS Frigidaire Freezer Thermistor, Electrolux Freezer Thermistor Sensor | ||
Products Details
Waterproof and corrosion resistant
Good electrical insulation
High-quality plastic and rubber materials
Fix and Installation
Inserting the 297018400 FreezerThermistor Temperature Sensor typically involves the following steps. However, please note that the specific installation process may vary depending on the refrigerator model and manufacturer. It is always recommended to consult the manufacturer's documentation or seek professional assistance for accurate installation instructions.
1. Preparation: Ensure that the refrigerator is unplugged and the power supply is disconnected to avoid any electrical hazards during the installation process.
2. Locate the old thermistor: Depending on the refrigerator model, the thermistor may be located near the evaporator coil, in the air duct, or in another designated location within the refrigerator compartment. Refer to the manufacturer's documentation to identify the location of the old thermistor.
3. Remove the old thermistor: Carefully disconnect any wiring harnesses or connectors attached to the old thermistor. Gently remove the old thermistor from its mounting location, taking note of its orientation and position.
4. Install the new thermistor: Take the new 297018400 freezer thermistor temperature sensor and position it in the same location where the old thermistor was installed. Ensure that it is securely fitted or fastened according to the manufacturer's instructions.
5. Connect the wiring: Attach the wiring harnesses or connectors from the refrigerator to the corresponding terminals on the new thermistor. Ensure a secure and proper connection, following any specific instructions provided by the manufacturer.
6. Reassemble and test: Once the new thermistor is securely installed and connected, reassemble any components or panels that were removed during the process. Plug in the refrigerator and restore the power supply. Monitor the refrigerator's operation and temperature to ensure that the new thermistor is functioning correctly.
Factory Info
Dongguan Senreach Electronic Co., Ltd. was established in 2000. Our factory covers an area of 4000 square meters with a monthly production capacity of 50 million pieces. We are committed to becoming a comprehensive circuit protection component manufacturer and solution supplier.
We are specialized in over current protection, over temperature protection, over voltage protection design, development, production and sales. Products are widely used in consumer electronics, automobiles, ships, communications, power supplies, power tools, new energy and other fields.
With variety of advanced manufacturing and testing equipment, we adopt perfect quality management system to ensure that every single piece of our components are safe and stable. Our operations are ISO9001:2000-certified and products meet international standards.
Equipment
Equipment
Production Machine
Production Machine
Documentory
Production Machine
Testing Machine
Production Machine
Our advantage
Price Advantage
We have a complete suuply chain from raw materials to final packing which enables us to control the production cost at every step.
Guaranteed Quality
Every piece of product pass full inspection by both auto test equipment and our QA team.
Stock Wholesale
We have open stock for some universal standard products. Delivery time is just about 1 week.
One-Window Service
We have R&D, QA, sales and after-sales team to offer you a full service including selection recommendation, technical support, after-sales protection.
Certifications
Exhibition
We’re confident in the design and quality of our 42002-0024S Sensor Replacement for Pentair/Sta-Rite Heaters. If you are not sure whether our parts correctly fit your appliance, please feel free to contact us or ask a question.
Hot Tags: refrigerator thermistor temperature sensor replacement, China refrigerator thermistor temperature sensor replacement manufacturers, suppliers, factory
