Range Oven Sensor Probe For Whirlpool

Products Description

Products Parameter

Products Details

Fix and Installation

There are a few signs that may indicate a faulty oven temperature sensor and the need for a replacement. Here are some common indicators:

1. Inconsistent Temperature: If you notice that your oven is not reaching or maintaining the desired temperature, it could be a sign of a faulty temperature sensor. For example, if you set the oven to 350°F (175°C) but it either doesn't heat up or heats up excessively, the sensor may be malfunctioning.

2. Overcooking or Undercooking: If your food consistently comes out overcooked or undercooked, even when following recipes or using cooking times you are familiar with, it could be due to inaccurate temperature readings from the sensor.

3. Error Codes: Some ovens display error codes when there is a problem with the temperature sensor. If you see an error code related to the oven temperature or sensor, it's a clear indication that the sensor may need to be replaced.

4. Slow Preheating: If your oven takes an unusually long time to preheat, it could be due to a faulty temperature sensor. The oven control board relies on the sensor to determine when the desired temperature has been reached, so a malfunctioning sensor can affect the preheating time.

5. Temperature Fluctuations: A malfunctioning temperature sensor may cause temperature fluctuations during the cooking process. You may notice that the oven temperature goes up and down sporadically, resulting in unevenly cooked food.

If you observe any of these signs, it's worth considering the possibility of a faulty oven temperature sensor. However, it's important to note that these symptoms could also be caused by other factors, such as issues with the oven control board or heating elements.

1. Safety First: Ensure that the oven is turned off and unplugged from the power source to prevent any electrical accidents.

2. Locate the Sensor: The oven temperature sensor is usually located at the back of the oven cavity, near the top. It is a small, cylindrical component protruding into the oven cavity. You may need to remove the oven racks to access it easily.

3. Remove the Old Sensor: Gently pull the sensor probe forward to expose the wire harness or connector attached to it. Carefully disconnect the wire harness from the sensor. If there are any mounting screws securing the sensor to the oven wall, remove them as well.

4. Install the New Sensor: Take the new oven temperature sensor and insert the probe back into the oven cavity through the hole where the old sensor was located. Make sure the sensor is positioned correctly.

5. Connect the Wire Harness: Reconnect the wire harness or connector to the new sensor. Ensure a secure connection to prevent any loose or faulty wiring.

6. Mount the Sensor: If there were any mounting screws, use them to secure the new sensor in place. Tighten the screws, but be careful not to overtighten.

7. Reassemble: If you had removed any oven racks, now is the time to put them back into place.

8. Plug in and Test: Plug the oven back into the power source and turn it on. Set the oven to a desired temperature and observe if the new sensor is functioning correctly. Check if the oven reaches and maintains the set temperature accurately.

Replace Models

Factory Tour

Why choose us

Price Advantage

Our factory offers a significant price advantage to our customers. Through efficient production processes, economies of scale, and strategic sourcing, we are able to keep our costs competitive. We aim to provide high-quality products at affordable prices, ensuring that our customers receive excellent value for their investment.

Guaranteed Quality

We adhere to stringent quality control measures throughout the manufacturing process to ensure that our products meet the highest standards. Our dedicated quality assurance team conducts thorough inspections and tests at various stages, from raw materials to finished products.

Stock Wholesale

We specialize in wholesale operations, offering our products directly to retailers, distributors, and other business customers. By eliminating middlemen and unnecessary markups, we provide competitive wholesale pricing to our clients. The wholesale model allows us to establish long-term partnerships and deliver products in bulk quantities, meeting the diverse needs of our customers.

One-Window Service

From product design and development to manufacturing, packaging, and shipping, we handle every aspect of the production process. Our experienced team of professionals assists our customers at every stage, ensuring seamless communication, efficient collaboration, and timely delivery.

Exhibition